Jovi Mirkovic
- Total activity 85
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 36
Activity overview
Latest activity by Jovi Mirkovic-
Jovi Mirkovic created an article,
The strokes aren't being recorded
If you find that your strokes are not being recorded please check that the curly cable underneath the rower is connected to the straight cable that comes out of the underside of the rail. The cable...
-
Jovi Mirkovic created an article,
-
Jovi Mirkovic created an article,
There's a knocking noise as I pedal
Your Satori exercise bike should be smooth and quiet when in use. If it is making a knocking noise when it is being used this is more often than caused by one of the pedals. In the first instance r...
-
Jovi Mirkovic created an article,
I found one or more of the parts damaged or missing when I opened the box
A lot of care is taken during production to ensure that all the parts are present and correct and in perfect condition during the manufacturing process. If you think some parts are missing, please ...
-
Jovi Mirkovic created an article,
I'm having trouble attaching the left pedal
To prevent it from coming off during exercise the thread on the left pedal is the reverse of the right and it needs to be tightened by turning anti-clockwise rather than the usual clockwise. Please...
-
Jovi Mirkovic created an article,
The resistance isn't working
If the resistance is not working when you increase or decrease the resistance level on the console this could be down to: A program not running Loose connection Console fault Motor fault In the f...
-
Jovi Mirkovic created an article,
I've plugged everything in but the computer console does not power up
If there is no power to the console when you plug the power in, then in most cases this is caused by the cable that plugs into the back of the computer not being properly inserted into its connecti...
-
Jovi Mirkovic created an article,
How do I get make sure the machine is level?
The Setry has leg levellers on the rear feet. To adjust the level of the machine simply turn the plastic end caps as shown below until the Setry sits completely level on the floor. Making sure the ...
-
Jovi Mirkovic created an article,
How do I set up a user profile or switch between different user profiles?
To set up a user profile or access the next user profile when the computer is on, press and hold the reset button. You'll then see one of U1, U2, U3, U4 flashing on the screen. Select the user prof...
-
Jovi Mirkovic created an article,
I'm missing some parts that the parts list says should be there
A lot of care is taken during production to ensure that all the parts are present and correct and in perfect condition during the manufacturing process. If you think some parts are missing, please ...